The Celette Mamouth system consists of heavy-duty floor-anchored rails, movable pulling and pushing towers, high-capacity hydraulic rams, vehicle anchoring clamps, and live electronic or laser measurement tools—all designed to support, secure, and realign large truck and bus frames with precision during collision repairs.
| REFERENCE | DESCRIPTION | QUANTITE |
|---|---|---|
| 22.BPL.540 | In-Ground rail 16m x 3m | 1 |
| COMPO STANDARD MA18.STD | COMPO SUPER MA18.SUP | ||
|---|---|---|---|
| REFERENCE | DESCRIPTION | QUANTITY | QUANTITY |
| 9201.03-1 | PUSHING CROSSMEMBER 3 MODULES. 170 cm HIGH | 2 | 3 |
| 9201.03-2 | PULLING UNIT WITH GAPS | 1 | 2 |
| 9540.708.21 | CROSSMEMBER CLAMP | 13 | 20 |
| AT.9704.21.1 | RAIL ANCHORING WEDGE | 16 | 28 |
| 9540.710 | STEK MALE PULLING PLATE | 1 | 2 |
| 9540.711 | SPREADER PLATE | 2 | 4 |
| 9540.712 | ADJUSTABLE EXTENSION | 4 | 4 |
| 9540.714 | CHAIN GUIDE | 2 | 2 |
| 9540.715 | ‘CLAMPS FOR “U” AND “I” PROFILES | 1 | 2 |
| 9540.716.3 | WRENCH | 1 | 1 |
| 9540.716 | SMALL SCREW JACK FOR PROFILE STAMP | 2 | 2 |
| 9540.731 | VERIN MECANIQUE | 2 | 2 |
| 9540.717 | STAND | 2 | 4 |
| 9540.721 | STAND SUPPORT FOR HOLDING THE CHASSIS | 1 | 2 |
| 9540.719 | RAM SUPPORTING BRIDGE ON CROSSMEMBER | 1 | 1 |
| 9540.720 | RAM SUPPORTING YOKE | 1 | 1 |
| 9540.723 | SIDE MEMBER ANCHORING | – | 1 |
| 9540.727 | SIDE MEMBER ANCHORING | – | 1 |
| 9540.732 | 20T STRAIGHTENING PRESS | – | 1 |
| 9450.733 | SUPPORTING SCREW | – | 2 |
| HYA.8 | TROLLEY FOR PULLING ACCESSORIES | 1 | 1 |
| 959.7136 | TOWER FOR TWISTING REPAIR | 1 | 1 |
| 9540.713.31 | ANCHORING BLOCK FOR RAIL | 4 | 6 |
| COMPO STANDARD MA18.HYD.STD | COMPO STANDARD with power pack | COMPO SUPER MA18.HYD.SUP | ||
|---|---|---|---|---|
| REFERENCE | DESCRIPTION | QUANTITY | QUANTITY | QUANTITY |
| B81 | LOCKING PIN | 15 | 15 | 15 |
| CN.3000.30 | CHAIN Lg 3,000 m | 3 | 3 | 4 |
| CR.210.30 | BOUBLE HOOK | 2 | 2 | 2 |
| ENSEIGNE07 | SIGNBOARD | 1 | 1 | 1 |
| HYA.6 | HYDRAULIC STORAGE TROLLEY | 1 | 1 | 2 |
| HYA.151 | 5 LITRES OIL TANK | 1 | 1 | 1 |
| HYP.52 | POWER UNIT (400V 3 phases 50Hz) 4 outlets, 700 bars, 4.5/1.8Lt/min | – | 1 | 1 |
| HYP.2301 | HYDRAULIC PUMP | 3 | – | – |
| PRES.3104 | 10T HYDRAULIC KIT | 1 | 1 | – |
| SK.1105 | STEK MALE CONNECTOR FOR RAM ROD (10T) | 3 | – | – |
| SK.2201 | 125 mm EXTENSION | 5 | 5 | 5 |
| SK.2202 | 250mm EXTENSION | 5 | 5 | 5 |
| SK.2203 | 500 mm EXTENSION | 2 | 2 | 2 |
| SK.3202 | STEK 90° “V” HEAD | 2 | 2 | 1 |
| SK.3203 | SERRATED SADDLE | 2 | 2 | 2 |
| SK.3205 | STEK FLATE BASE | 5 | 5 | 5 |
| SK.3206 | DOUBLE STEK MALE CONNECTOR | 3 | 3 | 3 |
| SK.3207 | STEK MALE CONNECTOR FOR RAM ROD (23T/30T) | 3 | 3 | 4 |
| SK.3209 | STEK PUSHING HEAD | 1 | 1 | 2 |
| SK.3210 | STEK SPHERIC HEAD | 2 | 2 | 2 |
| SK.3211 | DOUBLE STEK FEMALE CONNECTOR | 3 | 3 | 3 |
| VA10S.051 | 10T CYLINDER | 1 | 1 | |
| VV20.161 | 23T RAM, 160 mm STROKE | 1 | 1 | 1 |
| VV20.261 | 23T RAM, 260 mm STROKE | 2 | 2 | 3 |
| VV30.211 | 30T RAM, 210 mm STROKE | 1 | 1 | 1 |
| SK.1105 | STEK MALE CONNECTOR FOR RAM ROD (10T) | 1 | 5 | |
| SC.15031 | 10T HYDRAULIC COMPOSITION | – | – | 1 |
| PART NUMBER | DESCRIPTION | Qty |
|---|---|---|
| AT.540.03 | PERIPHERAL IN GROUND FRAME TO USE AT.6000 PULLING TOWERS | 1 |
| AT.6410 | PULLING TOWER 4M. | 1 |
| CAT.6004 | ANCHORING KIT FOR PULLING TOWER | 1 |
| TDN.2611 | DYNO PULLING TOWER | 1 |
| CAT.500 | PULLING ACCESSORIES COMPOSITION | 1 |
| SN.99.00 | PULLING STRAPS | 1 |
| CAS.2000 | SECURITY CABLE | 2 |
| ATD.206 | C-Clamp | 1 |
| CR.314 | HOOK | 1 |
| STN.400 | MECHANICAL TRAM GAUGE | 1 |
| HWA.CMC4000 | CHASSIS MEASUREMENT DEVICE | 1 |
| IN18.16K | INDUCTION HEATER | 1 |
