Naja 3D Auto Body Measuring System
NAJA 3D Evolution
- Products
- Electronic Measuring System
- NAJA 3D Evolution
CELETTE Naja 3D Electronic Auto Body Measuring System
Ultimate Guide for Collision Repair Professionals
A Guide for Collision Repair Professionals
Accurate measurement forms the foundation of quality structural repair. Without precise dimensional verification, technicians cannot confirm that straightening operations achieve factory specifications. The Naja 3D frame measuring system addresses this requirement through technology that delivers reliable measurements across the complete range of vehicle structural points.
The CELETTE Naja 3D is recognized as one of the industry’s most advanced and user-friendly electronic measuring systems, specifically engineered for vehicle collision diagnostics, structural analysis, and repair. With a comprehensive suite of cutting-edge features, the Naja 3D auto body measuring system improves repair accuracy, efficiency, and compliance with OEM standards, which are essential for modern auto body shops and collision repair centers.
What Is a 3D Auto Body Measuring System?
A 3D auto body measuring system is a computerized tool that captures three-dimensional reference points on the vehicle body and frame to diagnose damage and verify structural alignment before, during, and after repair. Unlike manual measurement methods or two-dimensional approaches, 3D systems provide comprehensive dimensional data that accounts for structural positions in all directions simultaneously.
The Naja 3D Evolution is CELETTE’s auto body measuring system, designed specifically for use on benches, lifts, and frame machines. This 3D frame measuring system combines precision hardware with OEM-referenced software to deliver the dimensional verification capability that professional structural repair requires.
The Naja 3D provides a complete 3D frame measuring system that addresses the dimensional verification requirements of professional structural collision repair. The system measures longitudinal (front-to-rear), lateral (side-to-side), and vertical (up-down) deviations of key points on the chassis and body, using a graduated scale and Bluetooth-connected sliding head to capture precise positional data.
Key Features & Benefits of Naja 3D Frame Measuring System
Highly Accurate 3D Electronic Measurement
- Delivers precise three-dimensional measurement of vehicle geometry.
- It provides diagnostic accuracy in identifying structural damage with the precision necessary to guide repair strategy and estimate preparation.
- It offers verification capability, ensuring that repairs meet OEM specifications with measurement accuracy that supports quality assurance requirements.
- Complies with strict accuracy standards, including NF X06044 and EUROPE-USA measurement protocols, ensuring reliability across applications.
Seamless Wireless Bluetooth Connectivity
- Wireless operation eliminates the need for cables between the measuring arm and the software interface.
- Allows flexible positioning, allowing technicians to position the measuring arm optimally without cable constraints limiting placement options.
- Cable-free operation enhances safety and workflow efficiency by reducing setup time and eliminating tripping hazards in active work environments.
Intuitive, User-Friendly Software
- The Naja auto body measuring system features visual guides and an interface designed for ease of use.
- Utilizes clear green and red indicators to prevent misreadings, with green indicating correct dimensions and red indicating faulty dimensions that require attention.
- Stores and prints detailed measurement reports for documentation and insurance requirements, customer communication, and quality assurance records.
- The intuitive design reduces training requirements and supports consistent measurement quality across technicians with varying experience levels.
Real-Time, Efficient Diagnostics
- Performs rapid and accurate three-dimensional checks, even with mechanical parts in place, reducing the disassembly required for initial damage assessment.
- Generates repair diagnostics in under 10 minutes, minimizing vehicle downtime and improving overall cycle time performance.
Extensive OEM Compatibility & Huge Vehicle Database
- Comprehensive vehicle coverage ensures the Naja 3D addresses the models your shop services.
- Access manufacturer-provided dimensional specifications to ensure that repairs target factory tolerances rather than generic measurements.
- OEM-provided 3D CAD data supports the world’s largest vehicle measurement database, with over 20,000 models available.
- Ensures repairs match manufacturer tolerances; used and approved by many major car brands for structural repair verification in certified collision networks.
- Continuous database additions ensure coverage remains current and updated as manufacturers release new models.
Modular, Professional Accessories Included
- Offers a range of specialized accessories for diverse measurement applications:
- Magnetic sockets to secure attachment to vehicle reference points
- Lateral probes to access measurement points in confined locations
- Lower support stands for stable positioning for under-vehicle measurement
- Holding arms and devices for diagnostics and pulling operations
- Calibrates easily using an included ISO calibration bar to ensure measurement accuracy and process compliance.
Flexible Operational Setup
- The Naja 3D frame measuring system is adaptable to various shop configurations, offering full compatibility with CELETTE benches, including the Sevenne, Rhone, and Griffon platforms.
- Works with vehicles positioned on lifts for measurement access and operates directly on the shop floor for facilities without the need for dedicated measurement stations.
- This flexibility ensures that the measurement capability integrates with your existing equipment configuration, rather than requiring workflow changes.
Traceable and Printable Reports
- Measurement data is stored digitally for future reference and audit purposes.
- Comprehensive printable reports document pre-repair condition, repair progress, and post-repair verification.
- Report formats address insurer documentation requirements for structural repair claims.
- Measurement records support internal quality assurance programs and ensure compliance with certification standards.
By upgrading to the Celette NAJA 3D Electronic Measuring System, your repair shop gains a competitive edge in precision, efficiency, and industry compliance, ensuring every vehicle is restored to manufacturer standards
Transform Your Collision Repair Process with a 3D Frame Measuring System
By upgrading to the CELETTE Naja 3D auto body electronic measuring system, your repair shop gains a competitive edge in precision, efficiency, and industry compliance, ensuring every vehicle is restored to manufacturer standards.
Contact us today to schedule a live demo or inquire about purchasing the CELETTE Naja 3D auto body frame measurement system. Learn how this tool is used for cars and all types of vehicles.
Products
Computerized measuring system for check and repair
REF NO : NA.3024WI | NA.3025WI | NA.3026WS
3D Electronic measuring system is one of the worlds most advanced and user-friendly measuring system in
this industry. Celette has been well known for its constant endeavours to provide the best in class collision
repair systems and diagnostic equipment to the car manufacturers and to the end user. We not only provide equipments but also offer technical solutions.
The Celette Naja on Bench is a computerized 3d measuring system for collision repair, designed for vehicle diagnostics and structural repair. As a bench mounted 3d measuring system, it provides fast, highly accurate measurement and assessment of vehicle frames using wireless Bluetooth connectivity, user-friendly software, and instant visual feedback (green/red signals for pass/fail). It facilitates precise damage analysis, supports live measurements during repairs, and generates detailed, printable reports for quality control and documentation. The system is OEM-approved, works with or without mechanical parts installed, and is compatible with various straightening benches and lifting platforms, making it highly versatile for the collision repair industry.
This automotive frame measuring system is compatible with Celette Frame Machine (Sevenne, Rhone, Griffon) and other frame machines in the market. To see how the technology measures frame damage point by point, explore the 3D auto body measuring system.
Frequently Asked Questions
What is the Naja 3D auto body measuring system?
A 3D auto body measuring system captures three‑dimensional reference points on the vehicle body and frame and compares them to OEM data to diagnose structural damage. Naja 3D Evolution is CELETTE’s computerized car frame measurement tool, combining a Bluetooth measuring head on rail with OEM‑based software for fast and accurate collision‑repair diagnostics.
How does the Naja 3D frame measuring system work during a repair?
The technician selects the vehicle in the Naja software, positions the measuring rail and sliding arm under the car, and records key points on the chassis and body in 3D. Live measurements are displayed with green/red tolerances, allowing the technician to monitor the frame while pulling and to verify that final dimensions match OEM specifications.
Can Naja 3D be used as a car frame measurement tool on any bench or lift?
Naja 3D is designed to work on CELETTE benches, on its dedicated Gazelle rails under two‑post or four‑post lifts, and even directly on compatible frame machines or floor systems in space‑limited shops. This makes it a flexible car frame measurement tool for various collision‑repair layouts.
What are the advantages of a 3D electronic auto body measuring system over manual gauges?
Compared to manual gauges, a 3D electronic frame measuring system like Naja 3D offers faster setup, higher accuracy, automatic comparison with OEM data, and clear on‑screen feedback with green/red indicators. It also generates pre‑ and post‑repair reports for OEM certification, insurers, and internal quality control.
Is Naja 3D integrated with CELETTE WebTools or AI platforms?
Yes, the latest Naja 3D systems are cloud‑connected and integrated with CELETTE WebTools and AI services, providing technicians with direct access to updated vehicle data, procedures, and digital reporting without requiring manual software updates. This supports continuous data accuracy and easier documentation across multiple repair sites.
What types of vehicles and repairs can the Naja 3D frame measuring system be used for?
Naja 3D is designed for a wide range of passenger cars, SUVs, and light commercial vehicles, and can measure vehicles with mechanical and suspension components installed or removed. It supports everything from minor alignment checks to major structural repairs on high‑end and OEM‑certified vehicles when used with CELETTE benches, jigs, and pulling systems.
