Collision Repair Systems with Heavy Duty Frame Machine for Trucks

CELETTE repair system's heavy duty frame machine

Heavy Duty Repair System: Precision Repair for Commercial Vehicles

CELETTE’s heavy-duty solutions are built for trucks, buses, trams, and large platforms, combining heavy-duty frame machines, modular straightening benches, in-floor rail systems, and advanced measuring tools to restore frames and cabs to OEM standards.

CELETTE Heavy Duty Straightening Systems

CELETTE’s straightening range, including our heavy-duty frame machines, is engineered for the structural complexities of trucks, buses, and trailers rather than adapted upward from passenger-vehicle equipment.

The following characteristics define the range:

  • High-force hydraulic technology specified for accident-damaged commercial chassis rather than for body panels.
  • Modular, scalable configurations that adapt to workshop layout and the vehicle categories a shop actually receives.
  • OEM-approved equipment, homologated by leading manufacturers, meaning formally certified against their own repair standards.
  • Integration with measuring systems, so straightening and dimensional verification run as a single workflow.
  • Global support and training, covering installation, technical assistance and certified operator programs.

CELETTE’s Key Collision Repair Systems

Heavy-Duty Straightening System

Mamouth Mobile System: A practical, heavy-duty frame machine with a multi-tower rig, 360° mobility, and 23-ton hydraulic power for workshops seeking heavy-duty capability without an in-ground installation.

BPL Rail Network: In-ground/on-ground U-beam grids that transform into a straightening platform extending up to 6 by 18 meters for large vehicles, and hydraulic pistons and brackets rated for 20 to 30 tons of force.

Truck Cab and Bus Repair

Menyr 3 Cab Bench: Scaffold-style bench for cab repair and module straightening with two towers for simultaneous multi-directional pulling, which multi-plane cab damage demands.

Chassis and Wheel Alignment

CMC 4000 Alignment: PC-based frame measurement with live deviation tracking that includes lateral warpage, height difference, and torsion, for reduced deviations and more precise correction.

AXIS4000 Wheel Alignment: Mobile, computerized, and dual-camera wheel alignment system for commercial vehicles, trailers, and agricultural units requiring no lift, pit, or a perfectly level floor.

Mamouth system web
BPL full system web

Why Choose CELETTE?

  • Modular & scalable for any shop size: CELETTE utilizes one component set across the entire range. Truck frame machine towers can be repositioned and locked anywhere along the rails, and extended by adding traversing beams and extra towers.
  • Real-time measurement & reporting: The CMC 4000 measures lateral warpage, height difference, and torsion, tracks deviation in real time throughout the pull, and issues a frame status report at the end. The AXIS4000 records axle values before and after adjustment.
  • Time-saving, durable setup design: The CMC 4000 measuring scales hook onto the chassis from the inside, so the fuel tank and spare wheel stay where they are. BPL anchoring clamps fit standard chassis rails and Tetrac+ ladder frame pulling clamps, enabling straightening with minimal removal of the chassis from the platform.
  • OEM-compliant results for insurers & audits: CELETTE maintains an OEM approval list and brand-specific anchoring covering manufacturers across Europe, Asia, and North America.
  • Trusted collision repair innovation: In 1953, CELETTE revolutionized the collision repair industry with the very first dedicated straightening bench combined with a jig-based repair system.
  • Global recognition and distribution network: CELETTE is recognized worldwide with a distribution network and authorized partners serving collision centers in major markets across North America, Europe, and Asia.

Upgrade Your Collision Repair Capabilities with CELETTE

Contact us today to schedule a demo, request a quote, or speak with a CELETTE specialist about integrating heavy-duty systems, such as our truck frame machine, into your workflow.

Frequently Asked Questions About Heavy Duty Repair Systems

How much pulling force does a heavy-duty truck frame straightening machine require?

CELETTE’s heavy-duty frame machines, including BPL pistons and brackets, are rated for 20 to 30 tons of push and pull force, while Mamouth delivers 23 tons of hydraulic power. Ladder frame construction requires that range because collision energy transmits along the rails rather than dissipating through crumple zones as it does in a unibody car.

Not necessarily. The U-beam grids install in-ground or on-ground according to the premises. In-ground gives a flush finish and the clearest working area, while on-ground installs faster and suits leased buildings. The Mamouth heavy-duty frame machine is a mobile alternative for workshops where no floor work is possible.

Yes. CELETTE’s CMC 4000 tracks deviation live during straightening, so the technician sees the frame move toward specification in real time and stops at the correct point rather than overshooting and pulling back in the opposite direction.

The Mamouth is an evolution of the BPL built in Hardox, an abrasion-resistant steel plate, which makes the same technology lighter, modular, and easier to operate, with towers that traverse 360 degrees around the vehicle. The BPL offers a larger fixed platform reaching 6 by 18 meters for the longest vehicles and the most severe structural damage.

Cab and module work is handled on the Menyr 3 bench, which carries two towers for simultaneous multi-directional pulling. Chassis straightening runs on the BPL or Mamouth. Workshops receiving both damage types generally operate both systems.

Connect with CELETTE Worldwide

Get in touch with us directly

Have a question or want to learn more? Drop us a message
below. We’d love to hear from you!

Have a question or want to learn more? Drop us a message below — we’d love to hear from you!

Products